The M-tec P20 is a compact pump for processing soft materials or pumpable products with a granularity of up to 4 mm. The P20 is mainly used to pump basic, decorative, synthetic resin and silicate renders, adhesive and reinforcing mortars, fillers or key coats.

As a 400V or 230V machine pump P20 is fitted with a frequency converter as standard.  This guarantees a powerful drive.  In addition this also enables output to be regulated continuously so that it can be adjusted to the various products. Naturally;the P20 has connections for operation with a compressor and for fully automatic feed-ing by means of a mixer.

The transparent layout of the controls and the conscious avoidance of superfluous switches make for easy operation. The large stable hopper can be cleaned quickly and ensures a long service life.

The compact dimensions and lightweight design ensure problem-free transport on the building site The large wheels combined with the fold-out handles ensure convenient transport at all times.As is typical for m-tec the P20 pump has very simple and quick-action locking systems that enable important elements such as the worm pump or motor, to be replaced in just a few seconds.


P20: facts

Areas of use and applications

All pumpable dry mortars, such as:
• adhesives wet
• cement plasters
• cementitious self- levelling
• lime cement plaster
• lime gypsum plaster
• lime plaster
• reinforcing and adhesive mortars
• self levelling products
• structured and decorative renders

Scope of delivery

Pump P20 incl. pump motor, material container, control with frequency converter, hose pressure gauge.

Recommended Accessories: Mortar hoses, air hoses, air fittings, compressor, remote control cable, sensor for mixer operation, bag mangle, mounted hopper, fine plaster spray gun, adhesive gun, extruder.


P20: added benefits

EasyPump
The use of a frequency converter enables the pump motor to be started at full power and permits a continuously adjustable output.&edsp;

EasyUse
Together, clearly structured controls, a compact and lightweight design and tensioning wedges make the P20 easy to handle.

Suitable applications:

•adhesives wet
•cement plasters
•cementitious self-levelling
•decorating plaster
•lime cement plaster
•lime gypsum plaster
•lime plaster
•reinforcing and adhesive mortars
•self-levelling products
•structured and decorative renders


Applications

•Construction chemicals
•Rendering
•Flooring
•ETICS
•Renovating

Standard delivery volume
approx. 3-22 1/min continuously adjustable (depending on the worm pump)
Conveying distance*
up to 50m
Conveying height*
up to 30m
Delivery pressure*
up to 30 bar
Drive motor
4,0 kW, 400V, 50 Hz
Electrical connection
400 V, 50 Hz, 3 ph
Fuse
16 A / 32 A
Connecting cable
5 x 4,0 mm2
Connector
32 A, 5 p, 6 h
Water supply
3/4 water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions
ca. 1400 x 650 x 540 mm
Weight
ca. 95 kg